evaluation of noise levels from various sources within zaria metropolis
(A CASE STUDY OF KADUNA STATE, NIGERIA)
In recent times, noise has been recognized as a major source of pollution in many urban and semi-urban settlements. This study identified the various sources of noise, compared noise levels in various parts of the study area with recommended standards and determined the geo-physical characteristic of noise generated in Zaria metropolis. A noise met... Continue Reading
development of an improved frame level redundancy scrubbing algorithm for static random access memory based field programmable gate array
The use of Static Random Access Memory (SRAM)-based Field Programmable Gate Array (FPGA) in critical applications has been considered a solution in space and avionics domain due to its flexibility in achieving multiple requirements such as re-programmability and good performance. However, SRAM-based FPGAs are susceptible to radiation induced Single... Continue Reading
design, construction and testing of a fluidised bed combustion boiler for energy production
With the ever-growing energy demand over the globe, fluidised bed combustion (FBC) technology is continuously gaining importance due to its ability to burn different low-grade coals and biomass as source of fuel. This study presents a waste-to-energy process by incineration of corncob as an agricultural waste in a fluidised bed boiler for thermal e... Continue Reading
determination of the suitability of cassava starch as an admixture in cement paste and concrete
This research work was carried out to investigate the effects and suitability of Cassava starch as an admixture in cement paste and concrete. A standard consistency test was carried out on the cement paste with concentrations of the cassava starch at 0%, 0.5%, 1%, 2%, 3%, 4% and 5% by weight of the cement used in the paste. A prescribed concrete mi... Continue Reading
development of an acceptable use policy framework for ibbul communication network
Bandwidth utilization in a campus network if not properly managed,may leads to the congestion of the network bandwidth. This research work presents bandwidth control system implemented at the access layer of a campus network which is aimed at reducing the processing time at the core of the network. Ibrahim BadamasiBabangidaUniversity Lapai (IBBUL) ... Continue Reading
development of automobile disk brake pads using eco-friendly periwinkle shell and fan palm shell materials
This research was conducted to produce asbestosfree automobile disk brake pads using eco-friendly; Periwinkle and Fan palm shells materials. The use of asbestos fiber is being avoided due to its carcinogenic nature that might cause health risks. A new brake pad was produced using agro waste materials (periwinkle shell and fan palmshells)with thermo... Continue Reading
bacterial foraging algorithm based tuning of on-load tap changing transformer for voltage regulation in power transmission network
The control of voltage level has been identified as one of the most important operational needs for efficient and reliable operation of power system equipment. Due to the fact that both the utility and customer equipment are designed to operate at certain voltage ratings. Prolonged operation of the equipment at voltages outside the allowable range ... Continue Reading
depuration studies on kaduna refinery wastewater using modified cu-doped goethite catalyst
Undoped and copper doped goethite catalysts weresynthesized and applied in Fenton depuration of Kaduna refinery wastewater. The percentage of copper in the doped catalysts are 0.2 wt% copper in Cu-doped (A), 1.6 wt% copper in Cu-doped (B) and 3.3 wt% copper in Cu-doped (C), respectively. Characterization of the catalysts were done using X-ray Diffr... Continue Reading
development of a video frame enhancement technique based on pixel intensity and histogram distribution for improved compression
Research attention has been focussed on the reduction of image data size (major problem) for its efficient compression, storage, and transmission. In this work, the developed brightness enhancement model was used to enhance the Discrete Cosine Transform (DCT), Discrete Wavelet Transform (DWT), Lifting Wavelet Transform (LWT), and Firefly Optimizati... Continue Reading
development of baobab/sisal reinforced low density polyethylene hybrid composite
In this work, the properties of baobab/sisal fibre reinforced low density polyethylene hybrid composites were studied. The effect of fibre loading and fibre treatment with varying sodium hydroxide (NaOH)concentration on the composite properties was investigated. The developed composites were characterized for tensile strength, modulus of elasticity... Continue Reading
development of eucalpytus tereticornis composite (barks and leaves) adsorbent for adsorption of chromium (vi) and lead (ii) ions from simulated wastewater
The research titled Development of Eucalpytus tereticornis composite for chromium (VI) and lead (II) ions adsorption from simulated wastewater was aimed to establish the efficacy of Eucalpytus tereticornis composite as an adsorbent applied in the adsorption of Cr6+ and Pb2+ ions from simulated solution of respective ions. The adsorbent was pretreat... Continue Reading
harmonics mitigation on variable frequency drive using single phase shunt active power filter controlled by artificial neural network a case study of kiln unit of dangote cement plant obajana
This research presents effect of harmonic generated by variable frequency drives (VFD).In the past, electrical power system equipment and devices were designed to produce nearly sinusoidal voltage and current waveforms. However, nowadays, with much interest and wide spreads of power electronics equipment, for industrials, commercials and residentia... Continue Reading
investigation of the thermal properties of wood ash and clay-sawdust mixture for use as insulation materials in a rocket stove
In recent years there has been an increased awareness to conserve energy through efficient use of fuels, energy saving devices and insulation against heat losses. Consequently, the construction of a rocket stove was undertaken in this research and the thermal property tests for ash and clay-sawdust insulation materials were carried out, after which... Continue Reading
performance evaluation of mini sprinkler irrigation system: comparison of the plastic and iron made sprinkler system
This dissertation is a study to evaluate and compare the hydraulic performance of plastic and iron mini sprinkler system using 8mm and 14mm diameter nozzle sizes. The study was carried out at a farm land of the national water resources institute, Mando, Kaduna. In this study, meteorological data such as rainfall, evaporation, relative humidity, win... Continue Reading
bituminous stabilization of laterite modified with lime for use as pavement materials
Marginal laterites A-7-6(14), improved with hydrated lime was stabilized using bituminous emulsion with a view to improving the strength properties of the soil. The preliminary investigation conducted on the natural lateritic soil showed that the soil belongs to the CH group using the Unified Soil Classification System or A-7-6(14) soil group using... Continue Reading
About e-Project Material Centre
e-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well-researched, reliable, and ready-made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references), and well-written. INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available, and explore your data.
Why Students Love to Use e-Project Material?
Guaranteed Delivery: Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed: We always do whatever is necessary to ensure every customer's satisfaction.
Disclaimer
e-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should help you generate new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Conditions
Using our service is LEGAL and IS NOT prohibited by any university/college policies. You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for your own research (if properly referenced)
- For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase) Direct citing (if referenced properly)
Refund and Privacy Policy
- Refunds: All sales are final. However, if you encounter any issues with accessing your purchased material, kindly contact our support team for immediate resolution.
- Privacy Policy: Your personal information is protected and will not be shared with third parties. We ensure secure payment processing and data confidentiality.
