kinetic studies of middle distillate formation during catalytic cracking of heavy gas oil using zeolite-y prepared from kankara-kaolin
In the economy of a modern refinery, fluid catalytic cracking unit (FCCU) plays a significant role, as it adds value to the refinery products. In this unit more attention is usually given to the behavior of gasoline formation, but it is also important to study the manner of the middle distillates (kerosene and diesel) formation during the cracking ... Continue Reading
an assessment of the performance and maintenance culture of the ahmadu bello university, samaru, zaria water treatment plant
The project An Assessment of the Performance and Maintenance Culture of Ahmadu Bello University, Samaru, Zaria, Water Treatment Plant aimed at assessing the performance and the maintenance culture of the Ahmadu Bello University Water Treatment Plant (ABU WTP).The technique of survey method, monitoring of treatment process and questionnaires were us... Continue Reading
a framework for rural roads accessibility planning
The concept of public participation and how it can be incorporated in transport planning was studied. Current planning methods and steps were reviewed, and a tool which incorporates public participation in planning (questionnaire) was developed. This study was carried out using questionnaires that incorporate socioeconomic factors that affect trans... Continue Reading
bioclimatic response in design of faculty of environmental sciences in the hot dry climate of yobe state university (ysu), damaturu
Thermal comfort in buildings located in hot dry weather conditions is improved architecturally with the use of appropriate and adequate bioclimatic design principles. Relationship between bioclimatic design principles and indoor thermal conditions are studied on three selected faculty buildings in north east Nigeria: School of Environmental Technol... Continue Reading
mechanical and corrossion behaviour of low carbon steelin crude oil inhibited by some extracts of acacia nilotica (gum arabic tree) plant
Five different parts of Acacia nilotcaplant (leaves,pods,seed,bark and root) were subjected to the following analyses; extraction, phytochemical screening, corrosion inhibition test of low carbon steel in crude oil using gravimetric analyses, mechanical properties and surface morphology evaluation of the samples.The corrosion rate of low carbon ste... Continue Reading
comparative assessment of the strengths of solid and glued laminated timber
Timber isa construction material with unparalleledenvironmental credential. Howbeit, limitations of span and crossectional dimension, strength reducing defects and anisotropy limits its engineering application. Mechanical methods of jointing to address the earlier challenge has introduced serious wood fiber failure and increased the embodied energy... Continue Reading
geographic information system-based traffic analysis zoning of federal capital city (fcc)
World over, there has been an increasing research into the field of Geographic Information System (GIS) with particular emphasis on addressing myriads of day to day issues with the application. One of such area that has received wide attention is Transportation Planning. This therefore underscores the urgency and appropriateness of this research. T... Continue Reading
investigation of corrosion inhibition of guava, banana and almond plant extract in 0.5m of hcl and h2so4 solution on low carbon steel
Extracts from the leaves of three plants namely; guava (Psidiumguajava: Fem- Myrtaceae), banana (Musa species: Fem-Musaceae) and almond leaves (Prunusamygdamus: fem- Rosaceae) were subjected to physico-chemical, phytochemical screening and corrosion test using gravimetric measurement with a low carbon steel flat bar coupon. The corrosion inhibition... Continue Reading
laboratory investigation of flow characteristics of a sutro weir
Linear proportional weirs refer to as sharp crested weir in which the discharge is linearly proportional to the head over the weir crest and tend to have high accuracy when compared with the non linear ones. The main objective of the study was to investigate the flow characteristics of a Sutro weir in an open channel.In this research work the flow ... Continue Reading
a study of the development, characterisation and degradability of polyester/nano-locust bean pods ash composite
This study produced locust bean pods ash, synthesized from it nanoparticles which were subsequently used for the production of polyester matrix composite. It characterized the synthesized particulates and the composite produced. It also evaluated the effects of degradation of the composite subjected to different agents on mechanical properties such... Continue Reading
development of a firefly algorithm based analytical method for optimal location and sizing of distributed generation in radial distribution networks
Optimal location and sizing of Distribution Generation (DG) units in radial distribution networks is critical to achieving an improvement in stability, reliability and reduction of power losses in the network. This dissertation presents a hybridized solution which is a combination of the analytical method and the firefly algorithm for optimal place... Continue Reading
development of an improved dynamic algorithm toenhance energy saving in long term evolution mobile access networks
This research work presents a dynamic algorithm for improving energy saving in Long Term Evolution (LTE) mobile access networks through off mode, sleep mode and multi-cell cooperation utilization at the eNodeBs. The LTE mobile access network environment and the eNodeBs energy saving models were developed with a view to implementing a dynamic energy... Continue Reading
evaluation of hot- gas and heated tool weldments of polypropylene/bone particulate composites
The evaluation of Hot-Gas and Heated-Tool weldments of Polypropylene/Bone composite was conducted. The composites were formulated by incorporating up to 30% by weight of calcined cow bone powder at an interval of 5% and -75?msieved size was used as reinforcing phase during compounding process. The polypropylene materials (in unreinforced state) and... Continue Reading
irrigation water management of sodic soil for tomato production
(A CASE STUDY OF BARWA-MINJIBIR IRRIGATION SCHEME, KANO NIGERIA)
A field experiment was conducted during 2013/2014 dry season at Minjibir irrigation scheme, along Jakara River, Kano State located at Longitude 8o30”E to 8o 32”E and Latitude 12o5”N to 12o20”N at 414 m above mean sea level. The study examined soil and water management strategies on sodic soil condition for the production of tomato.The exper... Continue Reading
modeling and simulation of a grid connected solar-hydro hybrid system to supplement power supply in kaduna north
The increasing and stochastic nature of consumers’ demand on electricity brought about the need for alternative means of complimenting the existing energy demand. In this research work, a grid connected hybrid system was modeled to support and improve the power quantity of the Kaduna north existing network. Load profiling was done using Artificia... Continue Reading
About e-Project Material Centre
e-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well-researched, reliable, and ready-made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references), and well-written. INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available, and explore your data.
Why Students Love to Use e-Project Material?
Guaranteed Delivery: Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed: We always do whatever is necessary to ensure every customer's satisfaction.
Disclaimer
e-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should help you generate new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Conditions
Using our service is LEGAL and IS NOT prohibited by any university/college policies. You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for your own research (if properly referenced)
- For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase) Direct citing (if referenced properly)
Refund and Privacy Policy
- Refunds: All sales are final. However, if you encounter any issues with accessing your purchased material, kindly contact our support team for immediate resolution.
- Privacy Policy: Your personal information is protected and will not be shared with third parties. We ensure secure payment processing and data confidentiality.
