Search result(s): 451 - 465 of 619 » Department » Engineering

development of a modified handover decision algorithm for inter-femtocell handover in long term evolution network

The present day cellular network faces an increasing problem of providing capacity and coverage for users. The Long Term Evolution (LTE) system provides a number of ways in vi mitigating these problems among one of which is the deployment of femtocell technology. The femtocell is an example of a heterogeneous network which comprises of different la... Continue Reading

Engineering

development of a position and trajectory tracking control of ball and plate system using a double feedback loop structure

This research work presents the development of a position and trajectory tracking control of ball and plate system. The ball and plate control system was considered as a double feedback loop structure (a loop within a loop), for effective control of the system. The inner loop was designed using linear algebraic method by solving a set of Diophantin... Continue Reading

Engineering

development of an improved ergodic capacity of underlay cognitive radio with imperfect channel state information

This research work presents the development of an improved ergodic capacity of underlay Cognitive Radio (CR) with imperfect Channel State Information(CSI). An underlay CR network under a Peak Interference Power (PIP) constraint imposed by a Primary User (PU) was considered .A closed former godic capacity expression of the Secondary User (SU)under P... Continue Reading

Engineering

development of an improved intrusion detection based secured robust header compression technique

This research presents thedevelopment of an improved Intrusion Detection based Secured RObust Header Compression (IDSROHC)techniquefor handling brute force attack. The secured RObust Header Compression (secured ROHC) was developed to secure Internet Protocol version six (IPv6) packets against false initial refresh attack by encrypting the cyclic re... Continue Reading

Engineering

effects of additives on biogas production from cow dung and chicken dropping mixed with digitaria smuts ii

This study was carried out to examine the effects of Single Super Phosphate with Wood ash on the production of biogas from Cow Dung and Chicken Droppings mixed with Digitaria Smuts II. An existing digester design was adopted (3 in 1 floating drums) and fabricated using locally available materials to digest Cow Dung from Kawo Abattoir, Chicken Dropp... Continue Reading

Engineering

application of improved bacterial foraging algorithm to the optimal siting and sizing of d-statcom in radial distribution networks

Optimal siting and sizing of Distribution Flexible AC Transmission Systems (D-FACTS) devices in power distribution networks maximizes loadability, compensates reactive power, minimizes power loss and enhances voltage profile. The search for optimal size and locations of these devices in radial distribution networks is challenging and requires robus... Continue Reading

Engineering

assessment of the performance of water supply service in kaduna north water works

The water supply infrastructure in Kaduna North Water Works (KNWW) has faced alot of problems, partly due to a neglect of the components over a long period and with tariffs at a low level, which was far from reflecting the real cost of the service. Economic efficiency still remains below the regional average, resulting in the lack of financial reso... Continue Reading

Engineering

performance enhancement of water supply distribution in minna metropolis

In this thesis, a diagnostic assessment of the entire water supply distribution network was carried out in order to evaluate problems associated with water supply in Minna. This assessment was carried out by conducting inventory of all the facilities in the entire water supply distribution network by onsite, physical and visual inspection of all th... Continue Reading

Engineering

scalability evaluation and improvement in ip-based campus networks: a case study of ahmadu bello university zaria network

This research presents the design and configuration of Multi-Protocol Label Switching (MPLS) technology to address scalability issues on a large and complex campus network such as Ahmadu Bello University campus network that is currently designed, configured and implemented with Open Shortest Path First Protocol (OSPF) network. Graphical Network Sim... Continue Reading

Engineering

potential-enhancement of degraded engine oil for friction reduction in cold upset forging of aluminium alloys

Enhancement of the friction-reducing properties of degraded 20W-50 engine oil by blending with neem and palm kernel oils respectively for application in cold upset-forging of aluminium alloys has been investigated using the ring compression test procedure. Three sets of blends of each of the vegetable oils with the degraded engine oil in the ratios... Continue Reading

Engineering

studying the optimal conditions for glucose and bio-ethanol production from spirogyra africana

In this research work, the optimal conditions for glucose and bio-ethanol production from Spirogyra africana were studied. The Spirogyra africana samples collected from the Ahmadu Bello University Zaria Dam were dried, milled and sieved to ? 125 ?m, and subsequently analyzed for carbohydrate content. Prior to hydrolysis, a set of the samples was pr... Continue Reading

Engineering

evaluation of some nigerian vegetable oils as lubricants in deep drawing operations

The Swift simulative formability test was employed. in this research work for the assessment of some locally produced vegetable oils viz: Palm oil, Palm Kernel oil, Cottonseed oil and Groundnut oil as lubricants in deep drawing operations. The assessment of these local oils was based on Swift test parameters; the limiting drawing ratio and the maxi... Continue Reading

Engineering

evaluation of plantain peel ash as a mixture

This study had investigated the admixture properties of plantain peel ash through a series of laboratory experiments. This was targeted at obtaining an effective admixture while relieving the environment from the menace of environmental pollution arising from indiscriminate disposal of agricultural wastes. Plantain peel ash was blended with dry cem... Continue Reading

Engineering

investigation of creep behaviour of black afara (terminalia ivorensis) timber

This study, investigated the creep behaviour of Black Afara (Terminalia ivorensis) timber in accordance with EN 408 (2004) and EN 13153 (2002). The data were analysed based on the Eurocode 5 (2004), Eurocode 0 (2002), JCSS (2006) and EN 384 (2004) specifications using Easyfit statistical package. The statistics of the reference material properties ... Continue Reading

Engineering

potential of sesame oil (sesanum indicum) bath as an austempering medium for ductile cast iron

The effect of hot-sesame oil bath as an austempering medium for ductile cast iron was investigated. Samples of ductile cast iron were machined to standard dimensions for tensile, impact and hardness/microstructural analysis test specimens prior to the austempering process. Sesame oil was used as hot quenching bath for the austempering process. The ... Continue Reading

Engineering

About e-Project Material Centre


e-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well-researched, reliable, and ready-made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references), and well-written. INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available, and explore your data.

Why Students Love to Use e-Project Material?


Guaranteed Delivery: Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed: We always do whatever is necessary to ensure every customer's satisfaction.

Disclaimer


e-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should help you generate new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.

Terms and Conditions


Using our service is LEGAL and IS NOT prohibited by any university/college policies. You are allowed to use the original model papers you will receive in the following ways:
  • As a source for additional understanding of the subject
  • As a source for ideas for your own research (if properly referenced)
  • For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase) Direct citing (if referenced properly)
Thank you so much for your respect to the author's copyright.

Refund and Privacy Policy


  • Refunds: All sales are final. However, if you encounter any issues with accessing your purchased material, kindly contact our support team for immediate resolution.
  • Privacy Policy: Your personal information is protected and will not be shared with third parties. We ensure secure payment processing and data confidentiality.

Contact Information