Search result(s): 271 - 285 of 619 » Department » Engineering

studies on the properties of short okra-glass fibers reinforced epoxy hybrid composites

In this work,theproperties of short okra-glass fibers reinforced epoxy hybrid composites were studied. Critical fiber length of the okra fiber was studied at different lengths (10mm, 20mm, 30mm, 40mm and 50mm). Fiber length of 20mm exhibited the best optimal property values. The properties obtained were Tensile strength value of 10.7MPa, MoE value ... Continue Reading

Engineering

modification of gum arabic

The physical and chemical modifications of gum arabic have been attempted. The physical method involved the p1asticization of gum arabic with sorbitol, glycerol and ethylene glycol . The chemical method was by acid hydrolysis, acetolysis and acetate formation. The films Cast from the modified and untreated gumarabic so1utions were subjected to stre... Continue Reading

Engineering

quality of sandcrete blocks produced in kano state

The thesis aims at studying the quality of the sandcrete blocks produced in Kano State and as such journals, codes, standards and other research materials were consulted and looked into carefully. The tests carried out include development strength test (wet and dry), wet compressive test, drying shrinkage, moisture movement and density in accordanc... Continue Reading

Engineering

a system for rural storage of fresh tomato

As a result of the need to minimize the huge losses of perishable agricultural crops produced in the rural communities and preserve their fresh qualities before getting to the consumer, at the farm and market levels, a storage system for fresh tomato was designed and constructed with the locally available raw materials. The storage system works on ... Continue Reading

Engineering

determination of the amount of dye extracted from plants and examination of their fastness properties to cotton fabrics

Nyam, Bitrus Bin, Determination of the Amount of Dye Extracted from Plants and Examination of Their Fastness Propertie s to Cotton Fabrics. Master of Arts in Industria l Design, September, 1985, 141pp., 16 Plates, 3k reference titles. The problem of this study is to investigat e the extent to which dyes can be extracted from plants as well, as exam... Continue Reading

Engineering

the effects of stabilization on black cotton soil

The addition of traces of chemicals in the stabilisation and modification of expansive soils have been a common practice. Basically, lime (hydrated lime and quick lime) have been found to be most effective in reducing the swelling properties of potentially expansive soils. In regions where lime is scarce, cement has been found to be a suitable alte... Continue Reading

Engineering

assessment of transient stability enhancement capability of unified power flow controller in a multi-machine power system

The study of the transient stability enhancement capability of Unified power flow controller (UPFC) in a multi-machine power system is presented. The test system was Nigerian 330kV power system and the focus was on the effect of disturbances on the largest generating unit (Egbin) in the system. The original network was reduced to retain the area of... Continue Reading

Engineering

beauty and fashion centre abuja: exploring the use of daylight to enhance visual comfort

Natural light is the essence from which all color reacts and takes existence. It's the all important element in interior design/architecture. It provides a space with genuineness and without it a room can look unexciting, uninteresting and can feel repulsive. Sunlight is an elemental part of our existence and a fundamental component of green design... Continue Reading

Engineering

design and fabrication of crude distillation unit components for a mini petroleum refinery

Nigeria is faced with high import of petroleum products, incessant shortage of the products and poor petroleum refining status. There is therefore the need to develop local technology in petroleum refining as a sustainable solution to these problems. This work contributes its own quota to this worthy course by designing and fabricating crude distil... Continue Reading

Engineering

development of zeolite y and zsm5 composite catalyst from kankara kaolin

Zeolite Y was synthesized from Kankara kaolin using a novel split method. The zeolite Y synthesized was thermally stabilized by impregnating with rare earth metal. Catalytic cracking catalysts; catalyst Y zeolite and catalyst Y zeolite + ZSM5 blend were formulated. The physiochemical and thermal properties of the raw and intermediate materials, zeo... Continue Reading

Engineering

a subsidence monitoring program for ahmadu bello university dam, zaria

A research project dealing with the determination and monitoring of subsidence (vertical movements) of A.B.U. Dam as a result of increase in volume of water in the reservoir, causing sudden load (causative effects) on the dam is discribed. It is of great interest and importance to design a program to detect, direction of these movements so as to pl... Continue Reading

Engineering

the suitability of cotton stalks for the production of medium density fibreboard

The medium Density Fibreboard is dry formed panel and is usually produced from lignocellulosic fibre bonded with resins. It is made from wood fibres. The purpose of this project is to investigate the suitability of cotton stalks for the production of such boards. The cotton stalks consist of the pith which is the soft central portion of the stem, t... Continue Reading

Engineering

non-circular boring on the lathe using chain drive for power transmission

A non-circula r borin g attachmen t ha s been developed . It consist s of a hydrauli c power system in th e form known a s TKBIO Copying Unit variou s individua l templates, and a chai n driv e power transmissio n system. Power is tappe d from th e lath e spindl e usin g a-frictio n clutc h , t o driv e th e templat e t o actuat e th e hydrauli c p... Continue Reading

Engineering

computer simulation of the telephone system in the northern states of nigeria

The telephone system in Nigeria has for many years been a subject of attack from many quarters. The poor performance of the system has defied all attempts aimed at improving the situation. This study seeks to identify the cause or causes of the poor performance of the telephone system in the Northern States of the country. The exchanges in use in t... Continue Reading

Engineering

effectiveness of overlapping hoops as ductility reinforcement in short reinforced concrete columns

Comparative study of the effectiveness of some typica l arrangements of overlapping hoops to ordinary rectangula r hoop was carrie d out. The overlapping arrangements were:- Diamond Shape; Singl e Crossing; and Double Crossing (See appendix). During th e study, a fixed stirru p spacing of 300mm (Model Size 120mm) and concret e - grade of 25 was use... Continue Reading

Engineering

About e-Project Material Centre


e-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well-researched, reliable, and ready-made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references), and well-written. INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available, and explore your data.

Why Students Love to Use e-Project Material?


Guaranteed Delivery: Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed: We always do whatever is necessary to ensure every customer's satisfaction.

Disclaimer


e-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should help you generate new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.

Terms and Conditions


Using our service is LEGAL and IS NOT prohibited by any university/college policies. You are allowed to use the original model papers you will receive in the following ways:
  • As a source for additional understanding of the subject
  • As a source for ideas for your own research (if properly referenced)
  • For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase) Direct citing (if referenced properly)
Thank you so much for your respect to the author's copyright.

Refund and Privacy Policy


  • Refunds: All sales are final. However, if you encounter any issues with accessing your purchased material, kindly contact our support team for immediate resolution.
  • Privacy Policy: Your personal information is protected and will not be shared with third parties. We ensure secure payment processing and data confidentiality.

Contact Information