structural detailing of a single story residential building with retaining wall
This project is mainly concerned with the presentation of information basically on the structural detailing of reinforced concrete members of a story building, in a sloppy land with a retaining wall. Structural detailing is a branch of structural work that transposes the idea of works of a structural engineer into working drawings for easier utili... Continue Reading
structural/reinforcement detailing of a single storey residential building with retaining wall
This is the presentation of an information on the structural reinforcement detailing of concrete members. Structural detailing is a branch of structural work that transposes the idea or works of a structural engineer into working drawing or easy utilization in the building construction works. Working drawing are produced an engineer for easy use ... Continue Reading
structural detailing of a reinforced concrete structure †duplex
(BUILDING FOR MR. INNOCENT I. AZUOBU IN NO 12 UGO – DAN STREET AZUIYIOKWU ABAKALIKI)
In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and foundation. Continue Reading
investigation on the causes of pavement failure along hillview off esbs road enugu
One of the major problems facing the country is pavement failure. It is the concern of the Institute of Management and Technology (IMT) authorities to carryout a case study of pavement failure along Hillview off ESBS Road Enugu. Continue Reading
the relevance of road to life and its activities
This project involves the route survey which includes: reconnaissance survey, theodolite traversing and leveling operations as well as soil tests which includes; plastic limit test, liquid limit tests and moisture content determination, compaction tests and California bearing ratio tests. Continue Reading
structural detailing of two storey building
The whole information conveyed in this book has been planned and written for proper understanding of structural detailing of a building. The approach in this book is to provide the readers sound and basic knowledge in structural detailing in a building. Consequently, I have given more details than is normally given in a book concerning detailing... Continue Reading
structural detailing of a reinforced concrete structure - duplex building for mr innocent i. azuobu in no 12 ugo - dan street azuiyiokwu abakaliki
In structural detailing, the project is initiated by the structural Engineer. The Architectural drawings are prepared by the Archived to the required scale and specification given to him by the client. The Structural Engineer designs the structural framework of the building and specification required such as slab, beam, column and foundation. For... Continue Reading
the water drainage problems
(A CASE STUDY OF IMT CAMPUS 3 ENUGU)
This research work on the water drainage problems (A case study of IMT campus 3 Enugu), the scope of this research work covers every activity which has to do with the drainage problems, background to the subject matter, rational for the study and the limitations of the study, the research review as, the related literature about the authors and scho... Continue Reading
utilization of steel slag for stabilization of a lateritic soil
A lateritic soil classified as sandy clay or (CL) and A-7-6 (5) according to Unified Soil Classification System (USCS) and AASHTO classification system respectively, was treated with up to 10% pulverized steel slag (an industrial waste product) by dry weight of soil. Elemental and chemical analysis of the steel slag was determined using x-ray f... Continue Reading
pollution problems and an engineering approach to the management and control of industrial effluents in otta, nigeria
This study examined the effects of effluent discharges from various point-loads on a purposively selected receiving river, the self-recovery ability of the river and the treatability of both the discharges and the receiving stream in a heavily industrialized community. The work involved field survey of industries producing and discharging ... Continue Reading
hydraulic modeling and optimization of waste stabilization pond design for developing nations
Wastewater stabilization ponds (WSPs) have been identified and are used extensively to provide wastewater treatment throughout the world. It is often preferred to the conventional treatment systems due to its higher performance in terms of pathogen removal, its low maintenance and operational cost. A review of the literature revealed that t... Continue Reading
evaluation of water quality modelling parameters: towards the evolvement of re-aeration coefficient for rivers in the nigerian environment
This study was carried out on River Atuwara in Ota, Ogun State, Nigeria with the aim of developing a coefficient of re-aeration model applicable to River Atuwara and other rivers in the Nigerian environment. This was achieved by sourcing for data once every month from 22 sampling locations of interest within a pre-selected segment of the ri... Continue Reading
an assessment of the impact of abattoir effluent discharge on the water quality of river illo, ota
This report presents results obtained from the investigation and water sampling exercise carried out on the segment of River Illo that passes through Sango in Ado Odo-Ota Local Government Area, Ogun State, Nigeria. The report reveals that while some people used water from the river for domestic, food production and recreation purposes, othe... Continue Reading
a mathematical model for prediction of the strength of sancrete cement block
(APPLICATION OF HENRY SCHEFFE’S AND OSADEBE’S CONCRETE OPTIMISATION THEORY)
Sandcrete blocks are prismatic units manufactured from lean (sand-cement) mortar mixes and are the predominant walling materials used in buildings in Nigeria and other countries. Although the blocks are preferred to other similar walling material such as bricks and concrete blocks due to the availability of the dominant material (sand) in the count... Continue Reading
About e-Project Material Centre
e-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well-researched, reliable, and ready-made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references), and well-written. INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available, and explore your data.
Why Students Love to Use e-Project Material?
Guaranteed Delivery: Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed: We always do whatever is necessary to ensure every customer's satisfaction.
Disclaimer
e-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should help you generate new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Conditions
Using our service is LEGAL and IS NOT prohibited by any university/college policies. You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for your own research (if properly referenced)
- For PROPER paraphrasing (see your university definition of plagiarism and acceptable paraphrase) Direct citing (if referenced properly)
Refund and Privacy Policy
- Refunds: All sales are final. However, if you encounter any issues with accessing your purchased material, kindly contact our support team for immediate resolution.
- Privacy Policy: Your personal information is protected and will not be shared with third parties. We ensure secure payment processing and data confidentiality.
