ADSORPTION OF PALM OIL WITH SYNTHETIC ADSORBENT (COAL)

By

Author

Presented To

Department of Chemical Engineering

ABSTRACT

This project was Carrie lent using sub-bituminous coal and crude palm oil. The degree of bleaching of the palm oil was monitored with a spectorphoto meter. The coal was collected in a lump from the mine. It air-chicle to removed the moisture content and thereafter, size reduced to a small particle size foe effective activation.

The activation process was carried out in a fume cup board and phosphoric acid was used as an activated agent.

In the treatment of palm oil, sodium hydro rude was used for the neutralization and rude acid for the deodorization of palm oil. Some experiment were also conducted to test for the iodine value, specification value, peroxide value, acidity value, melting point, free fatly acid value, and viscosity of palm oil.

After the preliminary treatment, the colour of palm oil was tested with a spectrophomenter to determined the initial colour of the palm oil. 100ml of these palm oil was measured into a beaker,10g of coal activated carbon with the particle size of 0.185mm was added to the beaker and heated at a temperature of 1000c for 40minute.

The oil was allow to cooled, thereafter it was filtered with a filter paper to collect the filtrate. The colour of the bleached oli tested to determined the degree of beaching.

The same experiment was repeated with the same weight of coal activated carbon at two difference temperature of 1500c and 200 0c the result obtained was recorded and the colour reduction was, at 1000c, colour reduction was 57%, at 1500c, the % colour reduction was 75%,at 2000c, the % colour reduction was 81%.

The same experiment was also conduction with 10g each of 0.45 particle size of activated carbon for three difference temperature of 1000c, 1500c and 2000c at a constant time of 40 minute each.

The result obtained was recorded and colour reduction for each experiment was, at 1000c, % colour reduction was 52%, at 1500,% colour reduction was 69%, at 2000c,% colour reduction 70%. It was observed that the smallest particle size of coal activated carbon has a higher percentage of colour reduction. Also it was noticed that, as the temperature of heating increases, colour reduction also increase.


TABLE OF CONTENT

Preliminary

Letter of Transmittal

Approval Page

Acknowledgement

Dedication

Abstract

CHAPTER ONE

1.1 INTRODUCTION

1.2 Scope/Objective of The Project

CHAPTER TWO

2.1 Theory of Adsorption

2.12 Type of Adsorption

2.13 Equilibrium Relations of Adsorption

(A) Langmuir Isotherm Theory

(B) Brunur-Emmett-Teller Theory

(C) Freunlich Isotherm

2.2 Plam Oil

2.22 Composition of Palm Oil

2.23 Properties of Palm Oil

2.24 Uses of Palm Oil

2.31 History of Coal in Nigeria

2.32 Coal Formation

2.33 Classification of Coal

2.34 Properties of Coal

CHAPTER THREE

3.1 Activation of Coal

3.12 Experimental Method of Coal Activation

3.13 Test For Porosity & Density

3.20 Preliminary Treatment of Palm Oil

2.23 Characterization of Palm Oil

3.3 Method of Adsorption

3.4 Experiment Result

CHAPTER FOUR

4.0 Analysis of Result

4.1 Analysis of Coal Activated Carbon

4.2 Analysis of Palm Oil

4.3 Analysis of Colour Reduction

CHAPTER FIVE

5.1 Discussion

5.2 Recommendation

5.3 Conclusion

5.4 Reference.

Learn and Obtain Diploma in Web development, Software development, Business, Technology and Creative Skills taught by industry experts. Explore a wide range of skills with our professional tutorials.

About E-Project Material Centre


E-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well researched, reliable and ready made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references) and well written.INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available and explore your data

Why Students Love to Use E-Project Material ?


Guaranteed Delivery Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed We always do whatever is necessary to ensure every customer's satisfaction

Disclaimer


E-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should be able to help you in generating new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.

Terms and Condition


Using our service is LEGAL and IS NOT prohibited by any university/college policies You are allowed to use the original model papers you will receive in the following ways:
  • As a source for additional understanding of the subject
  • As a source for ideas for you own research (if properly referenced)
  • For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase) Direct citing ( if referenced properly)
Thank you so much for your respect to the authors copyright