DESIGN AND CONSTRUCTION OF A TRANSMITTER
By
AKPAN EMMANUEL EE/N2003/011
Presented To
Department of
Electrical/Electronic Engineering
ABSTRACT
This project as the name implies is chosen, designed and constructed with the intention of transmitting information such as musicals news entertainments programs and so on.
And all these that are written above are being transmitted to the atmosphere using an electromagnetic, signal, and this particular project design and construction is exactly the type of electronics, instrument that are mainly used in a Radio Broadcasting House or Studio all over the world and ever in a communication place.
This project was achieved using these electronics components like electrolytic capacitors for smoothing, resistors for current Oppositions, Bipolar transistors frequency transistor), Trank Circuit with a variable capacitor and a variable or adjustable induction connecting worries Vero board for circuit connection switch a transmitting Antenna which sends the signal to the air when connected, light emitting Diodes for power indication.
And in conclusion improvement or modification of this project was possible so that it’s efficiency will be increased.
TABLE OF CONTENTS
Title Page
Approval Page
Dedication
Acknowledgements
Table of Contents
CHAPTER ONE
INTRODUCTION
CHAPTER TWO
2.0 Transmission
2.1 Modulation
2.2 Amplitude Modulation
2.3 Frequency Modulation
2.4 Block Diagram of Simple Transmitter
2.5 Need for Modulation
CHAPTER THREE
3.0 FM Modulation
3.1 Method of Generating and Detecting FM
3.2 Frequency Modulated Side and Band
CHAPTER FOUR
4.0 FM Transmitter
4.1 Function of the FM Transmitter
4.2 Block Diagram on
4.3 The FM Transmitter
4.4 The Main Circuit Diagram of the FM Transmitter
4.5 The List of the Component Used
4.6 Function of the Component in the Project
CHAPTER FIVE
5.0 Power Supply
5.1 The Problem Encountered During Construction
5.2 Cost Analysis Conclusion
References
