Site Logo E-PROJECTTOPICS

DESIGN AND CONSTRUCTION OF A TRANSMITTER


By


AKPAN EMMANUEL EE/N2003/011



Presented To


Electrical/Electronic Engineering Department

πŸ“„ Pages: 34       🧠 Words: 3600       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 128      

⬇️ Download (Complete Report) Now!


This project as the name implies is chosen, designed and constructed with the intention of transmitting information such as musicals news entertainments programs and so on.
And all these that are written above are being transmitted to the atmosphere using an electromagnetic, signal, and this particular project design and construction is exactly the type of electronics, instrument that are mainly used in a Radio Broadcasting House or Studio all over the world and ever in a communication place.
This project was achieved using these electronics components like electrolytic capacitors for smoothing, resistors for current Oppositions, Bipolar transistors frequency transistor), Trank Circuit with a variable capacitor and a variable or adjustable induction connecting worries Vero board for circuit connection switch a transmitting Antenna which sends the signal to the air when connected, light emitting Diodes for power indication. 
And in conclusion improvement or modification of this project was possible so that itÒ€s efficiency will be increased. 

TABLE OF CONTENTS
Title Page
Approval Page
Dedication
Acknowledgements
Table of Contents 

CHAPTER ONE 
INTRODUCTION 

CHAPTER TWO
2.0 Transmission
2.1 Modulation
2.2 Amplitude Modulation 
2.3 Frequency Modulation
2.4 Block Diagram of Simple Transmitter 
2.5 Need for Modulation  

CHAPTER THREE 
3.0 FM Modulation
3.1 Method of Generating and Detecting FM
3.2 Frequency Modulated Side and Band

CHAPTER FOUR 
4.0 FM Transmitter
4.1 Function of the FM Transmitter 
4.2 Block Diagram on 
4.3 The FM Transmitter
4.4 The Main Circuit Diagram of the FM Transmitter
4.5 The List of the Component Used
4.6 Function of the Component in the Project 

CHAPTER FIVE 
5.0 Power Supply
5.1 The Problem Encountered During Construction
5.2 Cost Analysis Conclusion
References

πŸ“„ Pages: 34       🧠 Words: 3600       πŸ“š Chapters: 5 πŸ—‚οΈοΈ For: PROJECT

πŸ‘οΈβ€πŸ—¨οΈοΈοΈ Views: 128      

⬇️ Download (Complete Report) Now!

πŸ”— Related Topics

CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR THE DESIGN AND CONSTRUCTION OF AN INVERTER DESIGN AND CONSTRUCTION OF 12VOLTS CAR BATTERY AUTOMATIC CHARGER WITH VOLTAGE LEVEL INDICATOR AND CHARGING PROCESS DISPLAY DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER DESIGN AND CONSTRUCTION OF A VEHICLE TRACKING AND ACCIDENT ALERT SYSTEM USING GPS AND GSM MODULE THE DESIGN AND CONSTRUCTION OF AN UNINTERRUPTED POWER SYSTEM (UPS) THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER DESIGN AND CONSTRUCTION OF POWER AMPLIFIER THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM THE DESIGN AND IMPLEMENTATION OF AN ELECTRONIC SIGN PATTERN DISPLAY DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER CONSTRUCTION OF 4600mAh POWER BANK CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA) DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY

click on whatsapp