THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE
By
UDELAOR JOSEPH .N. ME/H2002/002
Presented To
Department of Mechanical Engineering
ABSTRACT
A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels.
With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.
In attainment to this design objective and aims, a proper considerations was given to the machinability factor which includes, installation, simplification, durability, choice material operational efficiently serviceability of the masculine low costing and prolonged life span when operates with utilization with minimal down fine
The design details are given includes such items as materials and their characteristics. Adaptation methodology the parts relation with the whole device and the effect of the finished product upon which an inqiusit mined can make collection of fact in future which related to this project.
LIST OF ILLUSTRATION
1. Introduction
2. Literature Review
3. Material selection
4. the shelling llnit
5. The construction and Design methods
LIST OF SYMBOLS
SYMBOLS UNITS
N – Factor of safety Kilogram
M –Mass Kilogram
Dia – Diameter Meters.
M – Bending Moment Meters
T – Torque Newton meter
V – Velocity Newton – second
T – Time Seconds
I – Moment of inertial Kilogram (meter)
g. – Acceleration due to grarity Newton (meter)
G – Modulus of rigidity Newton (meter)
P – Pressine Newton (meter)
p. – Power Kilowatts
F – Force Newton’s
H – Height Meter
Rpm – Revolution per minute
R – Radius Meter
V – Volume Meter
Wt – Weight Newton’s
D – Density Kilogram – mater
Pc – Critical Load Newton
L – Length Meter
W – Width Meter
S – bending stress Newton
Y – Tensional strell Newton /meter
TABLE OF CONTENT
Title page ii
Release page iii
Letter of transmittal iv
Signature page v
Approval page vi
Dedication vii
Acknowledgement viii
Abstract ix
List of illustration x
List of symbol xi
Table of contents xiii
CHAPTER ONE
Introduction 1
1.1 Purpose of construction 2
1.2 Importance and specification of the project 3
CHAPTER TWO
Literature Review 9
2.1 Hand shelling method 10
2.2 Direct linkages and its limitation 10
2.3 Refined Design and its specification 12
CHAPTER THREE
Material Selection 18
3.1 Material selection and Design of shaft 21
3.2 Selection and location of Bearing 22
3.3 Electric Motor Selection 24
3.4 Selection Of Pulley Material 25
CHAPTER FOUR
The Shelling Unit 26
4.1 The frame 27
4.2 The spinning shaft 28
4.3 Belt Drive 33
CHAPTER FIVE
Construction and Design Method 38
5.1 Metal Hopper 38
5.2 The shelling Unit 39
5.3 Outlet 39
5.4 Barrel 39
5.5 Perforated metal 40
5.6 Sequence of Assembly 40
- FOR ENQUIRY
- support@e-projecttopics.com
- 09019904113
Learn and Obtain Diploma in Web development, Software development, Business, Technology and Creative Skills taught by industry experts. Explore a wide range of skills with our professional tutorials.
About E-Project Material Centre
E-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well researched, reliable and ready made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references) and well written.INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available and explore your data
Why Students Love to Use E-Project Material ?
Guaranteed Delivery Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed We always do whatever is necessary to ensure every customer's satisfaction
Disclaimer
E-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should be able to help you in generating new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Condition
Using our service is LEGAL and IS NOT prohibited by any university/college policies You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for you own research (if properly referenced)
- For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase) Direct citing ( if referenced properly)