THE APPLICATION OF STATISTICAL QUALITY CONTROL TECHNIQUE IN FOOD AND BEVERAGE INDUSTRY
(A CASE STUDY OF HABILA FOOD AND BREVERAGES NIGERIA LTD- KANO)
By
Author
Presented To
Department of Mechanical Engineering
ABSTRACT
Controlling and improving Quality has become an important business strategy for many
organizations, because a business that can delight customers by improving and controlling
quality can dominate its competitors. Hence, this project work focused on the application of
statistical quality control technique to Habila Food and Beverage Nigeria Limited, in order to
control and improve the quality of their products so as to remain in the competitive market.
To achieve the aim and objectives of this project work, quality control data were collected
through the primary source (i.e. directly from the Quality Control Department of the
company). Thereafter, the respective statistical parameters such as the Means, Ranges,
Standard Deviations, Centre Line Control Limit, (CL), Upper Control Limit (UCL) and
Lower Control Limit (LCL) were developed and analyzed for the company using statistical
approach. The resulting Control Charts was also constructed using the parameters developed
for better understanding and visibility. From the results, it was found that most of the process
data collated and analyzed lies within the designed range of specifications, gives values
implying that the process is capable of producing acceptable product. However, those ones
out of control which are attributed to assignable causes such as lack of personal training, poor
mix, mechanical fault, etc, are to be subjected to process monitoring and evaluation so as to
better their products.
TABLE OF CONTENTS
TITLE PAGE - -- -- -- -- -- - Error! Bookmark not defined
DECLARATION - -- -- -- -- -- -- -- - ii
CERTIFICATION- -- -- -- -- -- -- -- - iii
DEDICATION- -- -- -- -- -- -- -- -- - iv
ACKNOWLEDGEMENT- -- -- -- -- -- -- - v
ABSTRACT- -- -- -- -- -- -- -- - vi
TABLE OF CONTENT - -- -- -- -- -- -- -- - vii
LIST OF FIGURES- -- -- -- -- -- -- -- - x
LIST OF TABLES- -- -- -- -- -- -- -- - xi
CHAPTER ONE - -- -- -- -- -- -- -- -1
INTRODUCTION- -- -- -- -- -- -- -- -1
11 Background to the Study- -- -- -- -- -- -- -- -1
12 Statement of the Problem - -- -- -- -- -- -- -3
13 The Present Research Study - -- -- -- -- -- -3
14 Aim and Objectives of the Study- -- -- -- -- -- -- -4
15 Significance of the Study- -- -- -- -- -- -- -- -4
16 Scope of the Study - -- -- -- -- -- -4
17 Limitation of the Study- -- -- -- -- -- -- -5
18 Company Description at a Glance- -- -- -- -- -- -5
CHAPTER TWO - -- -- -- -- -- -- -- -7
REVIEW LITERATURE- -- -- -- -- -- -- -- -7
21 Review of Related Literature - -- -- -- -- -- -7
22 The Definition and Dimensions of Quality - -- -- -- -- -9
221 Performance: - -- -- -- -- -- -9
222 Reliability- -- -- -- -- -- -- -- -9
223 Durability- -- -- -- -- -- -- -- -9
224 Serviceability - -- -- -- -- -- -- -- -10
225 Aesthetics- -- -- -- -- -- -- -10
226 Features - -- -- -- -- -- -- -- -10
227 Perceived Quality - -- -- -- -- -- -10
228 Conformance to Standards- -- -- -- -- -- -10
23 Statistical Thinking for Quality - -- -- -- -- -11
231 Statistical Process Control (SPC) - -- -- -- -- -- -- -12viii
232 The Importance of SPC- -- -- -- -- -- -12
211 The Concept of Quality - -- -- -- -- -- -14
21 2 Quality Control and Quality Assurance- -- -- -- -15
24 The Role of Statistic in Quality - -- -- -- -- -15
241 The Statistical Quality Control Technique- -- -- -- -- -16
242 Types of SQC Tools- -- -- -- -- -- -17
25 Quality Control Charts- -- -- -- -- -- -- -19
251 Types of Control Charts with their Applications- -- -- -- -- -21
252 Control Charts for Variables- -- -- -- -- -- -- -21
253 Control Charts for Attributes: - -- -- -- -- -- -24
26 Distributions of data - -- -- -- -- -- -- -25
27 Types and Causes of Variation in Sqc- -- -- -- -- -26
28 Process Capability (PC)- -- -- -- -- -- -- -27
281 Measuring Process Capability - -- -- -- -- -- -28
282 Process Capability Index (Cpk)- -- -- -- -- -- -29
CHAPTER THREE- -- -- -- -- -- -- -32
METHODOLOGY - -- -- -- -- -- -- -32
31 Preview - -- -- -- -- -- -- -- -32
32 Items Used - -- -- -- -- -- -- -32
33 Data Collection- -- -- -- -- -- -- -- -32
331 Data extracted for Can filler Machines from appendix A - -- -- -32
332 Data extracted for Bottle filler Machines from appendix B- -- -- -33
34 Establishing the Mean, Range and Standard Deviation (SD) using Excel- -- -- -34
341 The Mean, Range and SD of Can fillers- -- -- -- -- -- -35
342 Establishing Control Limits, Range and Standard Error for Can filler - -- -- -36
343 The Mean, Range and SD of Bottle fillers using excel- -- -- -- -- -37
344 Establishing Control Limits, Range and Standard Error for Bottle filler- -- -38
35 Construction of Control Charts for both Can and Bottle filler- -- -- -- -40
351 The resulting X-bar Control Chart for Can filler - -- -- -40
352 The resulting R-Chart Control for Can filler - -- -- -- -- -41
353 The resulting X-bar Control Chart for Bottle filler- -- -- -- -42
354 The resulting R-Chart Control for Bottle filler- -- -- -- -42
36 Measuring the Process Capability (Cp) Of the Machine Fillers- -- -- -43
361 Determining the process capability for Can Filler:- -- -- -- -43
362 Determining the process capability for Bottle Filler:- -- -- -44
37 Determining the Process Capability Index (Cpk) Of The Machine Fillers- -- -- -- -44ix
371 Cpk for Can fillers- -- -- -- -- -- -- -44
372 Cpk for Bottle fillers - -- -- -- -- -- -45
CHAPTER FOUR - -- -- -- -- -- -- -46
DISCUSSION OF RESULTs- -- -- -- -- -- -- -- -46
41 Collected Data- -- -- -- -- -- -- -46
42 Analyzing the Established Parameters- -- -- -- -- -- -46
43 The Control Charts- -- -- -- -- -- -- -- -47
44 Analyzing the Process Capability Values- -- -- -- -- -- -48
CHAPTER FIVE - -- -- -- -- -- -- -- -49
SUMMARY, CONCLUSION AND RECOMMENDATIONS - -- -- -- -49
51 Summary - -- -- -- -- -- -- -- -49
52 Conclusion- -- -- -- -- -- -- -49
53 Recommendations- -- -- -- -- -- -50
REFERENCES- -- -- -- -- -- -- -- -- -51
APPENDICES - -- -- -- -- -- -- -- -- -54
- FOR ENQUIRY
- support@e-projecttopics.com
- 09019904113
Learn and Obtain Diploma in Web development, Software development, Business, Technology and Creative Skills taught by industry experts. Explore a wide range of skills with our professional tutorials.
About E-Project Material Centre
E-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well researched, reliable and ready made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references) and well written.INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available and explore your data
Why Students Love to Use E-Project Material ?
Guaranteed Delivery Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed We always do whatever is necessary to ensure every customer's satisfaction
Disclaimer
E-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should be able to help you in generating new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Condition
Using our service is LEGAL and IS NOT prohibited by any university/college policies You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for you own research (if properly referenced)
- For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase) Direct citing ( if referenced properly)