Site Logo E-PROJECTTOPICS

DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM


By


AMUGO UGOCHUKWU. C EE/H2003/067



Presented To


Electrical/Electronic Engineering Department

📄 Pages: 46       🧠 Words: 5433       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 574      

⬇️ Download (Complete Report) Now!

ABSTRACT

An intercommunication system is nothing but the communication between two or more persons not close to one another. This does not mean we should categorize telephones, fax, teleprinters, telegraphs etc. an example of intercom system sine they are used in communication between people. Infact, intercom involves short distance places. It is limited in electronics, offices, and hospitals. 
The intercom system under is a three way station type. This means that a person can communicate to the other at another station at his own convenient time. They call once another attention by the use of the tone generated by the use of tone generator.
Depress a button and the tone sounds, and the same switch is thrown to the intercom circuit thus they communicate.
This system to be used in solving the problem of poor communication in our department. Besides, it can be extended to some other offices by the addition this one may use a rotary switch

TABLE OF CONTENT

Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents

CHAPTER ONE
1.0 INTRODUCTION


CHAPTER TWO
Complete Circuit Description
2.0 Simplified block diagram of thee 3-way intercom system
2.1 Operation Principles

CHAPTER THREE
3.0 ICC1212C
3.1 Resistor 
3.2 Capacitor 
3.3 Condenser Microphone
3.4 Loudspeakers
3.5 Switches
3.6 Communication cables

CHAPTER FOUR
CIRCUITRY DESIGN AND DESCRIPTION 
4.0 Description of Power Supply Unit Circuit
4.1 Description of the tone Generator Circuit
4.2 Circuit Diagram of the Three Units and Explanation
4.3 Explanation of the Switching Circuit
 
CHAPTER FIVE
CONSTRUCTION AND PACKAGING 
5.0 Component Sourcing
5.1 Construction and Testing 
5.2 Audio Amplifying Stage
5.3 Prototype
5.4 Trouble shooting
5.5 Packaging
 
CHAPTER SIX
6.0 CONCLUSION
6.1 Further study and Design
 REFERENCE
APPENDIX

📄 Pages: 46       🧠 Words: 5433       📚 Chapters: 6 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 574      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR THE DESIGN AND CONSTRUCTION OF AN INVERTER DESIGN AND CONSTRUCTION OF AN INTRUDER DETECTOR FOR OFFICE AND HOME USE THE DESIGN AND IMPLEMENTATION OF AN ELECTRONIC SIGN PATTERN DISPLAY DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER CONSTRUCTION OF AN INTRUDER ALARM SYSTEM CONSTRUCTION OF 4600mAh POWER BANK DESIGN AND CONSTRUCTION OF BATTERY CHARGER CONSTRUCTION OF AUTOMATIC CHANGE OVER SWITCH THE DESIGN OF A 500 WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LOW INDICATOR [INVERTER] DESIGN AND IMPLEMENTATION OF MICROCONTROLLER BASED DTMF MULTIPLE DEVICES REMOTE CONTROL SYSTEM AN INTELLIGENT LEAD ACID BATTERY MANAGEMENT SYSTEM FOR SOLAR AND OFF-PEAK ENERGY STORAGE DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT DESIGN AND CONSTRUCTION A SOLAR POWERED MOBILE PHONE CHARGER DESIGN AND CONSTRUCTION OF 12VOLTS CAR BATTERY AUTOMATIC CHARGER WITH VOLTAGE LEVEL INDICATOR AND CHARGING PROCESS DISPLAY THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM Wireless Power Transfer system : Development and Implementation DESIGN AND CONSTRUCTION OF 2KW SOLAR PANEL INVERTER

click on whatsapp