Site Logo E-PROJECTTOPICS

DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR BOX COOKER


📝


Presented To


Engineering Department

📄 Pages: 85       🧠 Words: 8887       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 262      

⬇️ Download (Complete Report) Now!

ABSTRACT
A solarbox cooker is a device that converts solar energy into useful heat in a confined space. The solar cooking system which captures and utilizes the abundant solar energy was designed, simulated, constructed and tested. Plane reflectors were used to concentrate solar radiations continuously on the collector which result to heat gain. It is usually difficult to manually track the movement of the sun and the use of a tracking device may be very expensive. Hence, plane reflectors were used. At the initial stage, the typical metrological year (TMY) solar data of Zaria obtained was processed to obtain the monthly average daily solar resources of Zaria using the solar radiation and weather data processor TYPE 109 component of TRNSYS 16 software. The month with the least average daily solar radiation was considered as the design month and the result shows that the month of August has the least solar radiation and therefore, considered as the design month.Secondly, the solar cooker was constructed at Ahmadu Bello University, Zaria Mechanical Engineering Workshop using various tools for cutting and machining.Thirdly, the solar cooker was tested at Mechanical Engineering Department of ABU between 28th and 31st of October, 2016. During the course of the testing, it was observed that in general the performance of the cooker was so encouraging because it cooked rice within an hour. The maximum stagnation temperature and that of absorber plate temperature were found to be 141oC and 143oC respectively. The cooker was simulated using TRNSYS and EES software. The simulated results were compared with the experimental results to determine the level of agreement between the two using Root Mean Square Error (RMSE) and Nash Sutcliff Efficiency (NSE) statistical tool. The RMSE results are 4.8203oC and 2.604oC. While the NSE results are 0.9867 and 0.996. These results show that the experimental values and the simulated values are in good fit.The regression line for the experiment and simulation were obtained and were used to compute the cooking power of the cooker. At 50oC, the experimental and simulated cooking powers are 52.8W and 54.8W respectively. For the average solar radiation incident on surfaces at different time intervals for the 4 conservative days, the regression line showing line of best fit for the co-efficient of determination (r2) was found to be 91.87. And also, for the variation of simulated and experimental collector efficiency, the co-efficient of determination (r2) for both the simulated and experimental results were found to be 98.8 and 94.1 respectively. And the percentage of energy increment due to third reflector was found to be 84.5

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 85       🧠 Words: 8887       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 262      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

PERFORMANCE CHARACTERISTICS OF THE CRITICAL-DEPTH, LONG-THROATED FLUME ECONOMIC EVALUATION OF PAVEMENT OVERLAY DESIGN STRATEGIES DEVELOPMENT AND PERFORMANCE EVALUATION OF A FOUR ROW ANIMAL DRAWN MAIZE SEED PRECISION PLANTER Design Construction, Simulation and Testing of a 300W Wind Powered Battery Charger PROBABILISTIC EVALUATION OF HORIZONTALLY CURVED ALUMINIUM ALLOY BRIDGE DECKS ON STEEL GIRDERS EVALUATION OF LABOUR-BASED TECHNIQUE FOR CONSTRUCTION OF SMALL EARTH DAMS DESIGN, SIMULATION ,CONSTRUCTION AND TESTING OF A THERMOSYPHON SOLAR WATER HEATER FOR A BLOCK IN POSTGRADUATE HOSTEL DESIGN, CONSTRUCTION AND TESTING OF A CHARCOAL FIRED CRUCIBLE FURNACE FOR MELTING OF 10KG OF ALUMINIUM PRODUCTION AND PERFORMANCE EVALUATION OF BIODEGRADABLE GREASE (BIOGREASE) FROM Balanites aegyptiaca (DESERT DATE) SEED OIL DISTRIBUTION OF ENGINEERING PROPERTIES OF SOILS USED IN HIGHWAY CONSTRUCTION DESIGN, CONSTRUCTION AND TESTING OF A ZEOLITE-WATER SOLAR ADSORPTION REFRIGERATOR APPLICATION OF FIBRE REINFORCED CONCRETE IN THE DESIGN AND CONSTRUCTION OF TENSION CONTROLLED STRUCTURES CONSTRUCTION OF A ZIRCON- CEMENT PAD AND CALIBRATION OF PORTABLE SURVEY METERS FOR ENVIRONMENTAL RADIATION MEASUREMENTS COMPARATIVE STUDIES OF THE PERFORMANCE OF FILTER MEDIA MADE USING BIOCHAR AND ACTIVATED CARBON IN GREYWATER REMEDIATION EVALUATION OF THE FACTORS AFFECTING THE SELF-PURIFICATION CAPACITY OF RIVER KADUNA, NIGERIA PERFORMANCE EVALUATION OF TREATED RICE HUSK ACTIVATED CARBON IN WATER TREATMENT AND REMOVAL OF PHENOL PRODUCTION AND PERFORMANCE EVALUATION OF BIODIESEL FROM HIBISCUS SABDARIFFA AND HIBISCUS SURATTENSIS DESIGN,CONSTRUCTION AND EXPERIMENTAL EVALUATION OFTHEPRODUCTSOF A LOW COST BRIQUETTE MACHINE FOR RURAL COMMUNITIES IN NIGERIA HYDRAULIC AND CONTAMINANT TRANSPORT PERFORMANCE OF COMPACTED LATERITIC SOIL– BENTONITE MIXTURES PROPOSED AS WASTE CONTAINMENT BARRIER SCILCRETE AS A CONSTRUCTION MATERIAL FOR LOW COST HOUSING

click on whatsapp