WIRELESS SENSOR NETWORK
By
Author
Presented To
Department of Computer Science
CHAPTER ONE
INTRODUCTION TO WIRELESS SENSOR NETWORK
A Wireless Sensor Network (WSN) can be defined as a group of independent nodes, communicating wirelessly over limited frequency and bandwidth [1]. The novelty of WSNs in comparison to traditional sensor network is that they depend on dense deployment and coordination to execute their task successfully.WSNconsists of spatially distributed autonomoussensors to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, humidity, motion or pollutants and to cooperatively pass their data through the network to a main location[2]. The more modern networks are bi-directional, also enabling control of sensor activity. Generally, a WSN is composed of a large number of sensor nodes that are deployed outdoor at random (e.g., by dropping them from an aircraft) in a field [3]. Reports transmitted by these sensors are collected by base stations. It is essential to know the node location in many applications of WSN such as target tracking, event location reporting, geographic routing and directional querying. Determining the physical locations of sensor nodes after they have been deployedis known as the problem of localization [5].
1.1 Characteristics of wireless sensor network
The main characteristics of a WSN include
Power consumption constrains for nodes using batteries or energy harvesting
Ability to cope with node failures
Mobility of nodes
Communication failures
Heterogeneity of nodes
Scalability to large scale of deployment
Ability to withstand harsh environmental conditions
Ease of use
Power consumption
The basis of this research is location of node of sensors in a wireless sensor network.The location refers to coordinates which describe each node in the network as shown in figure 1.
Figure 1: Node in a wireless sensor network
These location coordinates to be estimated may be either physical location or data location:
• Physical Location: The sensor’s physical coordinates, that is, where it exists in space, are estimated.
INTRODUCTION TO WIRELESS SENSOR NETWORK
A Wireless Sensor Network (WSN) can be defined as a group of independent nodes, communicating wirelessly over limited frequency and bandwidth [1]. The novelty of WSNs in comparison to traditional sensor network is that they depend on dense deployment and coordination to execute their task successfully.WSNconsists of spatially distributed autonomoussensors to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, humidity, motion or pollutants and to cooperatively pass their data through the network to a main location[2]. The more modern networks are bi-directional, also enabling control of sensor activity. Generally, a WSN is composed of a large number of sensor nodes that are deployed outdoor at random (e.g., by dropping them from an aircraft) in a field [3]. Reports transmitted by these sensors are collected by base stations. It is essential to know the node location in many applications of WSN such as target tracking, event location reporting, geographic routing and directional querying. Determining the physical locations of sensor nodes after they have been deployedis known as the problem of localization [5].
1.1 Characteristics of wireless sensor network
The main characteristics of a WSN include
Power consumption constrains for nodes using batteries or energy harvesting
Ability to cope with node failures
Mobility of nodes
Communication failures
Heterogeneity of nodes
Scalability to large scale of deployment
Ability to withstand harsh environmental conditions
Ease of use
Power consumption
The basis of this research is location of node of sensors in a wireless sensor network.The location refers to coordinates which describe each node in the network as shown in figure 1.
Figure 1: Node in a wireless sensor network
These location coordinates to be estimated may be either physical location or data location:
• Physical Location: The sensor’s physical coordinates, that is, where it exists in space, are estimated.
Data Location: Non-physical coordinates for the sensor’s measured data are estimated
These coordinates describes where, in a particular space, the measured data vector lies
Estimating a sensor’s physical coordinates is intuitively important: when sensor data is reported, it should be accompanied with an indication of where in space that data was recorded Data location coordinates are made necessary by the bandwidth and energy limitations of a network In such sensor networks, large quantities of sensor data are recorded and are available, but typically are not sent through the network, due to the communication constraints Instead, summary statistics may be typically communicated, and occasionally when the situation requires it, full data is sent Data coordinates are a summary statistic, a lower-dimensional representation of the full data available, which preserve information about the relationships between sensors’ data Automatic estimation of physical location of the sensors in these wireless networks is a key enabling technology The overwhelming reason is that a sensor’s location must be known for its data to be meaningful If a system is set up to respond locally to changes in sensor data, then it must know where those changes are occurring Inmany cases, location itself is the data that needs to be sensed Localization can be the driving need for wireless sensor networks in applications such as warehousing and manufacturing logistics, in which radio tagged parts and equipment must be able to be accurately located at all times Also, sensor location information, if it is accurate enough, can be extremely useful for scalable, ‘geographic’ routing algorithms
To make these applications viable with possibly vast numbers of sensors, device costs will need to be low, sensors will need to last for years or even decades without battery replacement, and the network will need to organize without significant human moderation Traditional physical localization techniques such as Global Positioning System (GPS) and Local Positioning System (LPS) are not well suited for this requirement, GPS is the most popular localization system with relatively high accuracy, but it may not be realistic to equip each node in a WSN with GPS due to cost, form factor, energy consumption, and some other restrictive conditions [6] So, several other localization schemes, classified into two categories, which are:
range-based and
range-free
GPS on each device is cost and energy prohibitive for many applications, not sufficiently robust to jamming for military applications, and limited to outdoor applications Local positioning systems (LPS) rely on high-capability base stations being deployed in each coverage area, an expensive burden for most low configuration wireless sensor networks
In this research, I assumed that the monitored area is planar, ie the elevation difference among the nodes can be ignored thus the nodes distance from the control node is measured in two dimensions (2D) The technique of localization used in this research for node location computation technique is called the Modified Linear Intersection (MLI) for quick localization in a localization scheme based on local distance measurement MLI is a routine method used for control point densification in surveying engineering It is applied in localization for WSN and some experiments to estimate its usability are given
12 APPLICATIONS OF WIRELESS SENSOR NETWORKS
Some of the exciting characteristics of WSN are given as below:
121 Area monitoring
Area monitoring is a common application of WSNs In area monitoring, the WSN is deployed over a region where some phenomenon is to be monitored A military example is the use of sensors to detect enemy intrusion; a civilian example is the geo-fencing of gas or oil pipelines
When the sensors detect the event being monitored (heat, pressure), the event is reported to one of the base stations, which then takes appropriate action (eg, send a message on the internet or to a satellite) Similarly, wireless sensor networks can use a range of sensors to detect the presence of vehicles ranging from motorcycles to train cars
122 Forest fire detection
A network of Sensor Nodes can be installed in a forest to detect when a fire has started The nodes can be equipped with sensors to measure temperature, humidity and gases which are produced by fire in the trees or vegetation The early detection is crucial for a successful action of the firefighters; thanks to Wireless Sensor Networks, the fire brigade will be able to know when a fire is started and how it is spreading
123 Air pollution monitoring
Wireless sensor networks have been deployed in several cities (Stockholm, London or Brisbane) to monitor the concentration of dangerous gases for citizens These can take advantage of the ad-hoc wireless links rather than wired installations, which also make them more mobile for testing readings in different areas There are various architectures that can be used for such applications as well as different kinds of data analysis and data mining that can be conducted(8)
124Landslide detection
A landslide detection systemmakes use of a wireless sensor network to detect the slight movements of soil and changes in various parameters that may occur before or during a landslide And through the data gathered it may be possible to know the occurrence of landslides long before it actually happens This can help in avoiding the disasters caused by earthquakes, hurricanes, etc
125 Industrial monitoring
In this section, some of the applications of WSN to the industries are outlined
1251 Machine health monitoring
Wireless sensor networks have been developed for machinery condition-based maintenance (CBM) as they offer significant cost savings and enable new functionalities In wired systems, the installation of enough sensors is often limited by the cost of wiring Previously inaccessible locations, rotating machinery, hazardous or restricted areas, and mobile assets can now be reached with wireless sensors
1252 Data Logging
Wireless sensor networks are also used for the collection of data for monitoring of environmental information this can be as simple as the monitoring of the temperature in a fridge to the level of water in overflow tanks in nuclear power plants The statistical information can then be used to show how systems have been working The advantage of WSNs over conventional loggers is the "live" data feed that is possible
1253 Industrial sense and control applications
In recent research a vast number of wireless sensor network communication protocols have been developed While previous research was primarily focused on power awareness, more recent research have begun to consider a wider range of aspects, such as wireless link reliability, real-time capabilities, or quality-of-service These new aspects are considered as an enabler for future applications in industrial and related wireless sense and control applications, and partially replacing or enhancing conventional wire-based networks by WSN techniques [12]
1254 Water/wastewater monitoring
There are many opportunities for using wireless sensor networks within the water/wastewater industries Facilities not wired for power or data transmission can be monitored using industrial wireless I/O devices and sensors powered using solar panels or battery packs and also used in pollution control board
1255 Agriculture
Using wireless sensor networks within the agricultural industry is increasingly common; using a wireless network frees the farmer from the maintenance of wiring in a difficult environment Gravity feed water systems can be monitored using pressure transmitters to monitor water tank levels, pumps can be controlled using wireless I/O devices and water use can be measured and wirelessly transmitted back to a central control center for billing Irrigation automation enables more efficient water use and reduces waste [9]
1256 Greenhouse monitoring
Wireless sensor networks are also used to control the temperature and humidity levels inside commercial greenhouses When the temperature and humidity drops below specific levels, the greenhouse manager must be notified via e-mail or cell phone text message, or host systems can trigger misting systems, open vents, turn on fans, or control a wide variety of system responses(Greene, 2007)
1257 Structural monitoring
Wireless sensors can be used to monitor the movement within buildings and infrastructure such as bridges, flyovers, embankments, tunnels etc - enabling Engineering practices to monitor assets remotely without the need for costly site visits, as well as having the advantage of daily data, whereas traditionally this data was collected weekly or monthly, using physical site visits, involving either road or rail closure in some cases It is also far more accurate than any visual inspection that would be carried out
1258 Passive localization and tracking
The application of WSN to the passive localization and tracking of non-cooperative targets (ie, people not wearing any tag) has been proposed by exploiting the pervasive and low-cost nature of such technology and the properties of the wireless links which are established in a meshed WSN infrastructure
126 Military application
One of the main drivers for investigating wireless sensor networks is their use in military applications The military use-cases for wireless sensor networks are diverse They encompass applications such as:
Monitoring militant activity in remote areas of specific interest (eg, key roads, villages);
Force protection (eg, ensuring that buildings which have been cleared remain clear from infiltration by an adversary)
One prominent use-case which has received a great deal of interest from military personnel recently is base protection (or force protection in general) A possible set-up is depicted in Figure 2 Having deployed a headquarters in an area of active engagement it is essential to prevent the base from being attacked The surrounding terrain may be undulating or mountainous and potentially could be obscured in trees and vegetation Attack could come in the form of militant groups on foot or with motor vehicles In order to facilitate an early detection, the perimeter protection in Figure 2 would cover a belt around the camp of up to 4 km, while in practice ranges of up to 10 km might be a requirement Detection may be needed throughout the whole of this range whilst identification may only be required within a belt of around one to 1"2 km around the base
These coordinates describes where, in a particular space, the measured data vector lies
Estimating a sensor’s physical coordinates is intuitively important: when sensor data is reported, it should be accompanied with an indication of where in space that data was recorded Data location coordinates are made necessary by the bandwidth and energy limitations of a network In such sensor networks, large quantities of sensor data are recorded and are available, but typically are not sent through the network, due to the communication constraints Instead, summary statistics may be typically communicated, and occasionally when the situation requires it, full data is sent Data coordinates are a summary statistic, a lower-dimensional representation of the full data available, which preserve information about the relationships between sensors’ data Automatic estimation of physical location of the sensors in these wireless networks is a key enabling technology The overwhelming reason is that a sensor’s location must be known for its data to be meaningful If a system is set up to respond locally to changes in sensor data, then it must know where those changes are occurring Inmany cases, location itself is the data that needs to be sensed Localization can be the driving need for wireless sensor networks in applications such as warehousing and manufacturing logistics, in which radio tagged parts and equipment must be able to be accurately located at all times Also, sensor location information, if it is accurate enough, can be extremely useful for scalable, ‘geographic’ routing algorithms
To make these applications viable with possibly vast numbers of sensors, device costs will need to be low, sensors will need to last for years or even decades without battery replacement, and the network will need to organize without significant human moderation Traditional physical localization techniques such as Global Positioning System (GPS) and Local Positioning System (LPS) are not well suited for this requirement, GPS is the most popular localization system with relatively high accuracy, but it may not be realistic to equip each node in a WSN with GPS due to cost, form factor, energy consumption, and some other restrictive conditions [6] So, several other localization schemes, classified into two categories, which are:
range-based and
range-free
GPS on each device is cost and energy prohibitive for many applications, not sufficiently robust to jamming for military applications, and limited to outdoor applications Local positioning systems (LPS) rely on high-capability base stations being deployed in each coverage area, an expensive burden for most low configuration wireless sensor networks
In this research, I assumed that the monitored area is planar, ie the elevation difference among the nodes can be ignored thus the nodes distance from the control node is measured in two dimensions (2D) The technique of localization used in this research for node location computation technique is called the Modified Linear Intersection (MLI) for quick localization in a localization scheme based on local distance measurement MLI is a routine method used for control point densification in surveying engineering It is applied in localization for WSN and some experiments to estimate its usability are given
12 APPLICATIONS OF WIRELESS SENSOR NETWORKS
Some of the exciting characteristics of WSN are given as below:
121 Area monitoring
Area monitoring is a common application of WSNs In area monitoring, the WSN is deployed over a region where some phenomenon is to be monitored A military example is the use of sensors to detect enemy intrusion; a civilian example is the geo-fencing of gas or oil pipelines
When the sensors detect the event being monitored (heat, pressure), the event is reported to one of the base stations, which then takes appropriate action (eg, send a message on the internet or to a satellite) Similarly, wireless sensor networks can use a range of sensors to detect the presence of vehicles ranging from motorcycles to train cars
122 Forest fire detection
A network of Sensor Nodes can be installed in a forest to detect when a fire has started The nodes can be equipped with sensors to measure temperature, humidity and gases which are produced by fire in the trees or vegetation The early detection is crucial for a successful action of the firefighters; thanks to Wireless Sensor Networks, the fire brigade will be able to know when a fire is started and how it is spreading
123 Air pollution monitoring
Wireless sensor networks have been deployed in several cities (Stockholm, London or Brisbane) to monitor the concentration of dangerous gases for citizens These can take advantage of the ad-hoc wireless links rather than wired installations, which also make them more mobile for testing readings in different areas There are various architectures that can be used for such applications as well as different kinds of data analysis and data mining that can be conducted(8)
124Landslide detection
A landslide detection systemmakes use of a wireless sensor network to detect the slight movements of soil and changes in various parameters that may occur before or during a landslide And through the data gathered it may be possible to know the occurrence of landslides long before it actually happens This can help in avoiding the disasters caused by earthquakes, hurricanes, etc
125 Industrial monitoring
In this section, some of the applications of WSN to the industries are outlined
1251 Machine health monitoring
Wireless sensor networks have been developed for machinery condition-based maintenance (CBM) as they offer significant cost savings and enable new functionalities In wired systems, the installation of enough sensors is often limited by the cost of wiring Previously inaccessible locations, rotating machinery, hazardous or restricted areas, and mobile assets can now be reached with wireless sensors
1252 Data Logging
Wireless sensor networks are also used for the collection of data for monitoring of environmental information this can be as simple as the monitoring of the temperature in a fridge to the level of water in overflow tanks in nuclear power plants The statistical information can then be used to show how systems have been working The advantage of WSNs over conventional loggers is the "live" data feed that is possible
1253 Industrial sense and control applications
In recent research a vast number of wireless sensor network communication protocols have been developed While previous research was primarily focused on power awareness, more recent research have begun to consider a wider range of aspects, such as wireless link reliability, real-time capabilities, or quality-of-service These new aspects are considered as an enabler for future applications in industrial and related wireless sense and control applications, and partially replacing or enhancing conventional wire-based networks by WSN techniques [12]
1254 Water/wastewater monitoring
There are many opportunities for using wireless sensor networks within the water/wastewater industries Facilities not wired for power or data transmission can be monitored using industrial wireless I/O devices and sensors powered using solar panels or battery packs and also used in pollution control board
1255 Agriculture
Using wireless sensor networks within the agricultural industry is increasingly common; using a wireless network frees the farmer from the maintenance of wiring in a difficult environment Gravity feed water systems can be monitored using pressure transmitters to monitor water tank levels, pumps can be controlled using wireless I/O devices and water use can be measured and wirelessly transmitted back to a central control center for billing Irrigation automation enables more efficient water use and reduces waste [9]
1256 Greenhouse monitoring
Wireless sensor networks are also used to control the temperature and humidity levels inside commercial greenhouses When the temperature and humidity drops below specific levels, the greenhouse manager must be notified via e-mail or cell phone text message, or host systems can trigger misting systems, open vents, turn on fans, or control a wide variety of system responses(Greene, 2007)
1257 Structural monitoring
Wireless sensors can be used to monitor the movement within buildings and infrastructure such as bridges, flyovers, embankments, tunnels etc - enabling Engineering practices to monitor assets remotely without the need for costly site visits, as well as having the advantage of daily data, whereas traditionally this data was collected weekly or monthly, using physical site visits, involving either road or rail closure in some cases It is also far more accurate than any visual inspection that would be carried out
1258 Passive localization and tracking
The application of WSN to the passive localization and tracking of non-cooperative targets (ie, people not wearing any tag) has been proposed by exploiting the pervasive and low-cost nature of such technology and the properties of the wireless links which are established in a meshed WSN infrastructure
126 Military application
One of the main drivers for investigating wireless sensor networks is their use in military applications The military use-cases for wireless sensor networks are diverse They encompass applications such as:
Monitoring militant activity in remote areas of specific interest (eg, key roads, villages);
Force protection (eg, ensuring that buildings which have been cleared remain clear from infiltration by an adversary)
One prominent use-case which has received a great deal of interest from military personnel recently is base protection (or force protection in general) A possible set-up is depicted in Figure 2 Having deployed a headquarters in an area of active engagement it is essential to prevent the base from being attacked The surrounding terrain may be undulating or mountainous and potentially could be obscured in trees and vegetation Attack could come in the form of militant groups on foot or with motor vehicles In order to facilitate an early detection, the perimeter protection in Figure 2 would cover a belt around the camp of up to 4 km, while in practice ranges of up to 10 km might be a requirement Detection may be needed throughout the whole of this range whilst identification may only be required within a belt of around one to 1"2 km around the base
- FOR ENQUIRY
- [email protected]
- 09019904113
About E-Project Material Centre
E-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well researched, reliable and ready made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references) and well written.INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available and explore your data
Why Students Love to Use E-Project Material ?
Guaranteed Delivery Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed We always do whatever is necessary to ensure every customer's satisfaction
Disclaimer
E-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should be able to help you in generating new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.
Terms and Condition
Using our service is LEGAL and IS NOT prohibited by any university/college policies You are allowed to use the original model papers you will receive in the following ways:
- As a source for additional understanding of the subject
- As a source for ideas for you own research (if properly referenced)
- For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase) Direct citing ( if referenced properly)
