Site Logo E-PROJECTTOPICS

DEVELOPMENT OF A FOUR-ROW TRACTOR MOUNTED SOYBEAN PLANTER


📝


Presented To


Engineering Department

📄 Pages: 93       🧠 Words: 8297       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 91      

⬇️ Download (Complete Report) Now!

ABSTRACT
The traditional method of planting soybean in Nigeria does not result in obtaining maximum yield of the crop per unit area. This is due to either incorrect number of plants per stand, interrow spacing or intra-row spacing. This research work is embarked upon to develop a four-row tractor mounted precision soybean planter in order to address these challenges. The planter was designed, fabricated (in the months of June, July, and August, 2021) and evaluated in the Department of Agricultural and Bio-Resources Engineering, Ahmadu Bello University, Zaria Nigeria, during 2021 raining season. The planter has functional units off our hoppers, four seed metering units, four press wheel, four delivery chutes, four furrow openers, and four soil covering devices. The individual planting units we rearranged on the main frame at inter-row spacing of 50 cm as recommended by the agronomic practices of planting soybeans. The developed planter was evaluated both laboratory and on the field in terms of planting speed, seedling emergence, intra-row spacing, seed delivery rate, number of seeds per hole and percentage seed damage. The laboratory calibration test of the planter shows that it can deliver one (1) single seed per hole of soybeans (TGX 1951-3F) variety and 1.4% seed damage. The developed planter was mounted at the three-point linkage of the tractor (EICHER, Model: 5660, 50 hp) rear end; soybean seeds was poured in to the hopper. The tractor was set to 7 km/h, 10 km/h and 15 km/h and at 2 cm and 4 cm depth of planting and operated. A tractor forward speed of 15 km/h at 2 cm depth of planting produced the best combination in terms of seed emergence. The intra-row spacing averages 5.7 cm, and 50 cm inter-row spacing with an estimation of 400,000 plants per hectare. The results obtained from the field showed that the seed delivery rate was 48.2kg/ha, effective field capacity of 1.14 ha/hand field efficiency of 76.6%. These results indicate that the developed planter could plant 1 seed of soybean variety (TGX 1951-3F) per hole, efficient, affordable for optimum soybean plant population per hectare.

PLEASE NOTE

This material is a comprehensive and well-written project, structured into Chapter (1 to 5) for clarity and depth.


To access the full material click the download button below


OR


Contact our support team via Call/WhatsApp: 09019904113 for further inquiries.

Thank you for choosing us!

📄 Pages: 93       🧠 Words: 8297       📚 Chapters: 5 🗂️️ For: PROJECT

👁️‍🗨️️️ Views: 91      

⬇️ Download (Complete Report) Now!

🔗 Related Topics

DEVELOPMENT OF AN ADAPTIVE TRACKING AREA LIST LOCATION MANAGEMENT SCHEME IN LONG TERM EVOLUTION (LTE) NETWORKS DEVELOPMENT OF A MODIFIED LINK BUDGET FORLOW EARTH ORBITING (LEO)-BASED LAND MOBILE SATELLITE COMMUNICATIONS SYSTEM DEVELOPMENT OF A MODIFIED FRUIT FLY OPTIMIZATION ALGORITHM BASED LINEAR QUADRATIC REGULATOR CONTROLLER FOR AIRCRAFT PITCH CONTROL SYSTEM DEVELOPMENT OF PILOT SIZE PROCESS FOR ZEOLITE Y AND ZSM-5 PRODUCTION FROM KANKARA KAOLIN DEVELOPMENT OF AN OPTIMAL EXTRACTED FEATURE CLASSIFICATION SCHEME IN VOICE RECOGNITION SYSTEM USING DYNAMIC CUCKOO SEARCH ALGORITHM DEVELOPMENT OF AN IMPROVED CULTURAL ARTIFICIAL FISH SWARM ALGORITHM WITH CROSSOVER DEVELOPMENT OF PREDICTIVE MODEL FOR INTRA-CITY BUS TRAVEL TIME DEVELOPMENT OF MEASUREMENT-BASED ADMISSION CONTROL ALGORITHM FOR EDGE CARRIER ETHERNET NETWORK TO REDUCE PACKET LOSS AND IMPROVE BANDWIDTH UTILIZATION Development of an Optimal Reconfiguration Algorithm for Radial Distribution Electrical Power Networks DEVELOPMENT AND CHARACTERISATION OF EPOXY/BORASSUS PALM (Borassus aethiopum Mart.) LEAF STALK FIBRE REINFORCED COMPOSITE DEVELOPMENT OF A DISTRIBUTED BIG DATA FUSION ARCHITECTURE FOR MACHINE-TO-MACHINE COMMUNICATION USING ENSEMBLE LEARNING DEVELOPMENT AND CHARACTERIZATION OF RECYCLED HIGH DENSITY POLYETHYLENE (RHDPE)/NATURAL FIBRE COMPOSITES DEVELOPMENT OF ZnO/SiO2 PHOTOCATALYSTS FOR ESTERIFICATION OF WASTE COOKING OIL DEVELOPMENT AND PERFORMANCE EVALUATION OF HYDRAULIC PISTON PRESS BIOMASS HOLLOW BRIQUETTE MAKING MACHINE DEVELOPMENT OF ZINC-BASED/ZSM-5 CATALYST FOR PROPANE AROMATIZATION DEVELOPMENT OF A SMELL AGENT OPTIMIZATION ALGORITHM FOR COMBINATORIAL OPTIMIZATION PROBLEMS DEVELOPMENT AND CHARACTERIZATION OF Al-3.7%Cu-1.4%Mg ALLOY/PERIWINKLE ASH (Turritella communis) PARTICULATE COMPOSITES DEVELOPMENT AND SIMULATION OF A SINUSOIDAL PULSE WIDTH MODULATION-BASED CONTROL SCHEME FOR IMPROVED EFFICIENCY AND TORQUE PRODUCTION IN SINGLE PHASE INDUCTION MACHINES DEVELOPMENT OF AN IMPROVED SCHEDULING ALGORITHM FOR MULTICAST SERVICES OVER WiMAX NETWORKS USING PARTICLE SWARM OPTIMIZATION TECHNIQUES DEVELOPMENT OF AN IMPROVED INTEGRATED ROUTING PROTOCOL FOR OPPORTUNISTIC NETWORK WITH CONGESTION CONTROL USING PRE-EMPTIVE DATA EVICTION

click on whatsapp