PRODUCT DEVELOPMENT IN THE CABLE INDUSTRY: PROBLEMS AND PROSPECT

(A CASE STUDY OF CUTIX CABLE PLC NNEWI ANAMBRA STATE)

By

GERALD NWNERI IBEH

Presented To

Department of Marketing

ABSTRACT

This research work is aimed at identifying some of the variables affecting new product development in the cable industry using Cutix cable PlC. Nnewi as a case study. A look at this problem has show that customer's wants and needs should be put into. Consideration before deciding on the new product to be produced, and the firm should make some that they have enough raw materials to meet the quantity ordered by her customers to avoid the problem of stock-out in the company. This research is made up of five chapters, chapter one is centered on the introduction of the study, the purpose and the variables affecting product development. Chapter two deals with the works of some intelligent scholars who had done some research on new product development and some of the likely problems one can encounter when developing a new product. Chapter three dealt with the research methodology, the design of the study, questionnaires and method of data collection. Chapter four looked into the findings and analysis while chapter five gave insight on the summary of difficulties involved before a firm finally come out with a new product in the market and the recommendations given to the cable industry to achieve the production of new products, without difficulties. It also contains the limitation of the study and suggestions for further study.


CHAPTER ONE

INTRODUCTION:

The product or watchword for marketing has to be associated to "innovation or die

This innovational attributes can become a philosophy compelling or almost parallel to that of the marketing concept (Stanton WS 1981)

Definitions

1 Offering new improved products for present markets

2 A strategy of selling a new product to existing markets

3 A state of creating new products that moves the product from concept to test phase and also involves the development of marketing mix (promotion, distributions and prices)

4 A product market growth strategy in which a company develops new products to sell to its existing markets

5 Consist to of the companies seeking products for its current markets

Development is often referred to as the technical side of business only This interpretation or emphasis is not too concise as development itself is more than the application of scientific planning to ensure the progress of the enterprises as a whole

A clearer idea of the development functions is concerned with word " improvement" A firm that has decided to go into the manufacturing of a product that is in someway an improvement on those there competitors If the firm wishes to have any success hey must exercise the development function right from the start

The established business must pay a needed attention to give he product a better position in the market, otherwise it would be outrunned or out stripped by vibrant competitors Improvement in design performance, materials and processes by a progressive firm may have direct impact on their product Again, the demand for a certain circle may be of uncertain demand especially where fashion is involved and hence product development is paramount and of vital importance

New product may be introduced to checkmate or replace again (obsolete) or unsuccessful ones The need to smoothout seasonal sales fluctuation, exploring new opportunities and using or maximinising excess plant capacity A new product can be a minor modification to the existing product features or in the packages of the product The

Product development can as well meaning item which is "totally" new in concept The term "new" product depends on the view of the firm or company concerned what may not be looked at as a new product by the leader in the industry may be referred to as "new" by some other companies within that particular industry

The need for product development can also be seen when we realize that

30 to 40 percent of a firms current value

sales and products do same from products that were not in the firms product portfolio twice years ago New results to either utilizes excess plant capacity or as a need to have enough products to have care of the seasonality in sales

11 Background Of The Study

Developing a product to satisfy the desire of the customers is always an up-hill task and most times a night more to most to most manufactures Some manufactures are confronted with problems because of there incapacitations to handle product development

Cutix plc is a company located at Nnew-Anambra state Whose responsibility is to produce durable cables? The company is an employer of many workers Cutix plc isa well know manufacturing outfit with credible excellent perfance in its corporate and social responsibilities They are experts in electric cables and wires The firm enjoys a commandable return on investment despite this, the firm still need to strengthen their market show byway of givens priority to further product development

According to WK Meniru, development is often understood and referred as the technical side of business and it also involves the application of Scientic planning to ensure the programs of the enterprises as a whole In developing the product, a firm will also mercase its market share and the sales volume of the firm will also increase

Some products of cutix cable came to a decline stage and this is as result of poor product development Improvement in design performance, materials process by a progressive company may have direct impact on the sales of the competing enterprises and this may render the product absolute

Cutix cable PLC Nnewi was incorporator with the chater to make and produce durable and high quality wires and cables using maximum local resources The employed 100% indigenous manpower, uses local inputs in machinery and adopts rapid integrated programmes for its work-force

The reason for choosing cutix PLC as a case study is that out of 100 different types and sizes of cable manufactured in Nigerian cable industry, by cutix PLC only forty (40) were successful in the market Therefore, this study is aimed at identifying problems and prospects that leads to these massive product failure and to profer solutions

12 STATEMENT OF THE PROBLEM

Product development is usually a complex situation that requires tactfulness It is an inbill task for most firms, this is because companies developing products are not even sure of its acceptance or success in the market Companies or firms that do not consideration seems to be taking some avoidable risks

Such companies may finally see their products falling victim of changing consumer taste and need and at the same time face domestic and foreign competitions Some of the problem associated to product development tends to have contributed to the inability of cutix 15 adequately handle the process and the problem could be traceable to poor marketing research, poor marketing efforts, inadequate marketing analysis and fragmented marketing of new products at a smaller market segment rate than the mass market

Physical factors as product quality and packaging is part of the problem For cutix PLC Nnewi their may dilemma is the identification of which factor among these constitute bottle-neck in their product development This is one of the challenges of this study

13 PURPOSE OF THE STUDY

1 To identify the processes involved before cutix PLC could come out with a new product development (idea generation, and ands with commercialization)

2 To identify the problems militating the various stages of product development with respect to Cutix PLC Nnewi

3 To axertain how government policies can influence cutix cables in developing a new product

4 To find out how cutix can develop a product that would command market a leader

5 To sort out alternative measures, of which if implemented by the marketing department of cutix would lead to innovation of a viable product at the lowest minimum cost

14 SIGNIFICANCE OF THE STUDY

Due to the economic condition of the country change in consumer needs and preferences, technological changes and increase in competitions In the cable industry in Nigeria with particular attention to cutix PLC, this research becomes paramount and ultmost importance in order to carry out a thoroughly study on the problems and prospects that cable manufacturers encounter in developing a new product On completion of this work, it recommendations will be made available to cable manufacturer in Nigeria

This in turn would enable the manufacturers to respossition their products in a more attractive way, have a good market share and indeed maintain its position as a product innovation This result would also enable cutix cable PLC in the following ways:-

i To achieve sales growth and profit maximizations

ii Attract positive consumer reactions to its products

iii To replace the aging in successful products

iv To smooth out seasonal sales fluctuations

v To explore new opportunities and using excess plant capacity

15 RESEARCH QUESTIONS

1 Does poor market analysis affect the development in the cable industry?

2 Does poor timing of products introduction affect product development in the Nigerian cable industry?

3 Poor feasibility studies does it affect the development of products?

4 Does the product satisfying the need of her target market audience?

16 HYPOTHESIS

1 Null Hypothesis (Ho) Lack of raw materials does

not affect new product development in cutix cable PLC

2 Alternative Hypothesis (H1) Lack of raw material affects new products development in cutix cable PLC

3 Null Hypothesis (Ho) The products of cutix cable Plc does not satisfy the need of her target market audience

4 Alternative Hypothesis (H1) The products of cutix PLC satisfies the need of her target market audience

17 SCOPE OF THE STUDY

The economic and social justification for the existence of business in the ability of the business to meet to the needs of her customers profitably A firm or company can meet this basic responsibility to the society through constant product development This research is therefore designed to identify those problems and prospects an organization (cable manufacturers) encounter when developing a product in a developing economy like Nigeria, where there is high cost of capital acquisition, frequent changes in consumer behaviours, high cost of electricity, and high cost of labour and manpower

Cutix cable PLC Nnewi was chosen by the researcher as the base for this study on problems and prospects of product development in the cable industry due to the fact that it was discovered that out of hundred (100) products developed by cutix PLC, only forty (40) were able to reach commercialization stage successfully

18 DEFINITION OF TERMS

The terms used in this research which have unique meaning is subjected to different readers of the project The definitions are as follows:-

 MARKET A market is a set of actua and potential buyer

of goods and services it is also defined as people with need, with money, with willingness and ability to buy

 MARKETING Marketing is a unique function of

business concerned with finding and satisfying customers needs wants on the basis of benefits (Ugonwanyi W)

 INNOVATE To introduce something new

 INNOVATOR Somebody that introduces new thing or

first users

 INNOVATION Changes, change is the only thing that

is constant

 ECONOMIC Deals with production, distribution and

consumption of goods and services It also deals scarcity and how to cope with it Attention of resources and effort to make a living as well as provision of burn and needs

About E-Project Material Centre


E-Project Material Centre is a web service aimed at successfully assisting final year students with quality, well researched, reliable and ready made project work. Our materials are recent, complete (chapter 1 to Minimum of Chapter 5, with references) and well written.INSTANT ACCESS! INSTANT DOWNLOAD. Simply select your department, choose from our list of topics available and explore your data

Why Students Love to Use E-Project Material ?


Guaranteed Delivery Getting your project delivered on time is essential. You cannot afford to turn in your project past the deadline. That is why you must get your project online from a company that guarantees to meet your deadline. e-Project Topics Material Centre is happy to offer instant delivery of projects listed on our website. We can handle just about any deadline you send our way. Satisfaction Guaranteed We always do whatever is necessary to ensure every customer's satisfaction

Disclaimer


E-Project Topics Material Centre will only provide projects as a reference for your research. The projects ordered and produced should be used as a guide or framework for your own project. The contents of the projects should be able to help you in generating new ideas and thoughts for your own project. It is the aim of e-Project Topics Centre to only provide guidance by which the projects should be pursued. We are neither encouraging any form of plagiarism nor are we advocating the use of the projects produced herein for cheating.

Terms and Condition


Using our service is LEGAL and IS NOT prohibited by any university/college policies You are allowed to use the original model papers you will receive in the following ways:
  • As a source for additional understanding of the subject
  • As a source for ideas for you own research (if properly referenced)
  • For PROPER paraphrasing ( see your university definition of plagiarism and acceptable paraphrase) Direct citing ( if referenced properly)
Thank you so much for your respect to the authors copyright
X

Need Help Finding or Downloading Your Project Material?

If you don't see the topic you're looking for or You need urgent/express attention, click the WhatsApp Icon/link below to contact ADMIN and get the material you need instantly. We are always available online to attend to your needs. Thanks